Permanent Adjustment of Theodolite

Permanent adjustment of a theodolite refers to the process of setting the fundamental relationships between the different parts of the instrument so that accurate measurements can be obtained. Unlike temporary adjustments, these adjustments are not required at every setup but must be checked periodically.

For ITI Surveyor trainees, understanding permanent adjustments is essential to ensure the accuracy and reliability of theodolite observations.

Reading of Angles and Field Book Entry of Measured Angles

In theodolite surveying, accurate reading of angles and proper recording in the field book are essential for reliable results. Surveyors measure horizontal and vertical angles using a theodolite and record them systematically for further calculations and plotting. For ITI Surveyor trainees, understanding this process is very important.

Reading of Angles

Theodolite is used to measure both horizontal and vertical angles. The readings are taken from graduated circles provided in the instrument.

Temporary Adjustment of Theodolite and Angle Measurement Process

Theodolite is a precision instrument used for measuring horizontal and vertical angles in surveying. Before taking any measurement, it is essential to perform temporary adjustments to ensure accuracy. After proper setup, angles can be measured using standard procedures. For ITI Surveyor trainees, understanding these steps is very important.

Types of Theodolite, Parts of Theodolite, Terms Used in Theodolite Survey

Theodolite is a precision instrument used in surveying for measuring horizontal and vertical angles. It is widely used in engineering and construction work. To use the theodolite effectively, it is important to understand its types, main parts, and commonly used terms in theodolite surveying.

Types of Theodolite

Theodolites are classified based on their construction and method of reading:

Introduction to Theodolite

Theodolite is a precision surveying instrument used for measuring horizontal and vertical angles. It is one of the most important instruments in surveying and is widely used in civil engineering, construction, and mapping. For ITI Surveyor trainees, understanding the theodolite is essential for advanced surveying work.

Methods of Plane Table Survey (Radiation, Intersection, Resection, Traversing)

Plane table surveying is a graphical method in which observations and plotting are done simultaneously in the field. Various methods are used depending on the nature of the survey area and the type of work. The main methods of plane table survey are radiation, intersection, resection, and traversing. Each method has its own procedure and application.

Plane Table Survey, Principle, Merits & Demerits, Instruments and Setting Up

Plane table surveying is a graphical method of surveying in which field observations and plotting are carried out simultaneously. It is widely used for small-scale surveys where quick and direct mapping is required. For Surveyor trade trainees, understanding the principle, instruments, and setup of plane table surveying is essential.

Introduction to AutoCAD and Use of AutoCAD Commands

AutoCAD is a computer-aided design (CAD) software widely used in engineering, architecture, and surveying for creating precise drawings and plans. It helps surveyors prepare maps, layouts, and technical drawings with high accuracy and efficiency. For ITI Surveyor trainees, learning AutoCAD is essential for modern surveying practices.

Adjustment of Closing Error and Precautions in Using Prismatic Compass

In compass surveying, errors may occur due to inaccuracies in measurement, local attraction, or instrument handling. These errors lead to closing error in a traverse. Proper adjustment of closing error and correct handling of the prismatic compass are essential for achieving accurate results. For Surveyor trade trainees, understanding these concepts is very important.

Calculation of Included Angle, Local Attraction, Magnetic Declination, True Bearing and Closing Error

In compass surveying, accurate measurement and correction of bearings are essential for reliable results. Surveyors must understand how to calculate included angles, detect local attraction, apply magnetic declination, determine true bearings, and identify closing errors. These concepts are fundamental for Surveyor trade trainees.

Conversion of Bearing (WCB to R.B.)

In compass surveying, bearings are used to represent the direction of survey lines. Bearings can be expressed in two main systems: Whole Circle Bearing (WCB) and Reduced Bearing (R.B.), also known as Quadrantal Bearing (QB). Understanding the conversion between these systems is essential for accurate surveying and plotting.

Whole Circle Bearing (WCB)

Whole Circle Bearing is measured clockwise from the north direction. It ranges from 0° to 360°.

Instruments and Their Setting Up (Compass Survey)

In compass surveying, accurate measurement of directions depends on the proper use and correct setting of instruments. Surveyors use different types of compasses and accessories to determine bearings and carry out fieldwork. Understanding these instruments and their correct setup is essential for students of the Surveyor trade.

Instruments Used in Compass Survey

The main instruments used in compass surveying are as follows:

Basic Terms Used in Compass Survey

Compass surveying is one of the methods used in surveying to measure the direction of survey lines with the help of a compass. It is widely used for small areas where high precision is not required. Understanding the basic terms used in compass survey is essential for Surveyor trade trainees, as these terms form the foundation of direction measurement and fieldwork.

Calculation of Area (Regular & Irregular Figures) and Knowledge of Site Plan

In surveying, calculation of area is an important task used in land measurement, planning, and construction. Surveyors frequently calculate areas of both regular and irregular figures to determine land size, estimate materials, and prepare maps. Along with this, understanding site plans is essential for representing surveyed data in a clear and organized manner. For students of the Surveyor trade, these concepts are fundamental for practical fieldwork and office work.

Terms Used in Chain Survey, Offsets, Field Book and Method of Chaining on Sloping Ground

Chain surveying is one of the simplest and most commonly used methods in surveying. It involves linear measurements and is widely used for small areas. To perform chain surveying effectively, it is important to understand various terms, types of offsets, use of field books, and methods of chaining, especially on sloping ground.

Uses of Chain/Tape, Testing of a Chain and Corrections

In surveying, measurement of distances is one of the most fundamental operations. Chains and tapes are commonly used instruments for this purpose. Despite the development of modern electronic instruments, chains and tapes are still widely used in basic surveying work due to their simplicity and reliability. Understanding their uses, methods of testing, and necessary corrections is essential for students in the Surveyor trade.

Field Procedure of Chain Survey, Errors in Chain Survey and Plotting Procedure

Chain surveying is one of the simplest and most commonly used methods in surveying. It involves only linear measurements and is suitable for small areas with simple details. To achieve accurate results, it is important to follow a systematic field procedure, understand possible errors, and apply proper plotting techniques. These aspects are essential for students in the Surveyor trade.

Ranging (Direct & Indirect), Principle of Chain Survey and Applications

Ranging and chain surveying are fundamental concepts in the field of surveying. They are widely used for measuring distances and establishing straight lines between points on the ground. For students of the Surveyor trade, understanding ranging methods, principles of chain surveying, and their applications is essential for accurate fieldwork and map preparation.

Use and Application of Conventional Signs and Symbols

In surveying and technical drawing, it is not always practical to represent real-world objects in their actual form on maps and plans. Therefore, conventional signs and symbols are used to represent various features such as roads, buildings, rivers, trees, and boundaries. These symbols are standardized and universally accepted, making it easier to understand and interpret drawings and maps.

Knowledge of Different Types of Scales, Determination of R.F and Uses of Scales

In surveying and technical drawing, it is not always possible to represent actual dimensions of objects on paper due to size limitations. Therefore, scales are used to reduce or enlarge the size of objects proportionally. Understanding different types of scales, determination of Representative Fraction (R.F.), and their uses is essential for students in the Surveyor trade.

Introduction of Surveying, Types, Uses, Applications and Principles

Surveying is the science and art of determining the relative positions of points on, above, or below the surface of the earth. It involves measuring distances, angles, and elevations to prepare maps and plans. Surveying is one of the oldest and most essential practices in civil engineering and plays a key role in planning, designing, and executing construction and infrastructure projects.

Details of Layout of Lettering, Lines & Dimensioning System

In technical drawing and surveying, clear communication of information is very important. This is achieved through proper lettering, correct use of lines, and accurate dimensioning. These elements form the foundation of any engineering drawing and help in conveying the exact details of a design or survey plan. For students of the Surveyor trade, understanding the layout of lettering, lines, and dimensioning systems is essential for producing neat, readable, and professional drawings.

Dimensions of Drawing Sheet

In technical drawing and surveying, the use of standard drawing sheet dimensions is very important. Proper sheet size ensures uniformity, clarity, and easy handling of drawings. For trainees in the Surveyor trade, understanding the dimensions of drawing sheets is essential for preparing neat and professional drawings.

Layout of Drawing Sheet

The layout of a drawing sheet is a fundamental aspect of technical drawing and surveying work. A properly arranged drawing sheet ensures clarity, uniformity, and professionalism in presentation. In the Surveyor trade, drawings and maps are important tools for representing field data, measurements, and project details. Therefore, understanding the correct layout of a drawing sheet is essential for every trainee.

Importance of Safety and General Precautions in Surveyor Trade

Surveying is an essential field in civil engineering and construction that involves measuring, mapping, and analyzing land. The work of a surveyor is highly technical and often carried out in challenging environments such as construction sites, roads, forests, rivers, and uneven terrains. Due to the nature of this work, safety becomes a critical aspect of the surveyor trade.

Use of AutoCAD Commands for Drawings

AutoCAD is a powerful computer-aided design software used for creating precise engineering drawings. In surveying and civil engineering, AutoCAD helps in preparing plans, maps, and layouts efficiently. Understanding the use of AutoCAD commands is essential for ITI Surveyor trainees to create accurate and professional drawings.

Classification of Roads, Terms Used in Road Engineering, Alignment, Gradients & Super Elevation

Road engineering is an important branch of civil engineering that deals with the planning, design, construction, and maintenance of roads. Surveyors play a key role in road projects by providing accurate data and alignment. For ITI Surveyor trainees, understanding classification of roads, basic terms, alignment, gradients, and super elevation is essential.

Classification of Roads

Roads can be classified based on different factors:

Points to be Considered During Reconnaissance Survey

Reconnaissance survey is an important stage in route location, especially in road surveying. It involves a preliminary inspection of the area to identify suitable routes and gather essential field information. Proper consideration of various factors during this survey ensures selection of an economical, safe, and efficient alignment. For ITI Surveyor trainees, understanding these points is essential.

Types of Surveys for Location of a Road

Surveying plays a crucial role in the planning and construction of roads. Before constructing a road, different types of surveys are conducted to determine the most suitable route, design, and alignment. These surveys ensure safety, economy, and efficiency in road construction. For ITI Surveyor trainees, understanding these surveys is essential.

Degree of Accuracy in Surveying

In surveying, accuracy refers to how close a measured value is to the true value. The degree of accuracy indicates the precision and reliability of survey measurements. It is an important concept that helps surveyors evaluate the quality of their work. For ITI Surveyor trainees, understanding the degree of accuracy is essential for producing reliable survey data.

Definition of Degree of Accuracy

Degree of accuracy is defined as the ratio between the error in measurement and the total distance measured.

Common Errors in Levelling and Their Elimination

In levelling, accurate determination of elevations depends on correct observation and proper handling of instruments. However, various types of errors may occur during fieldwork. These errors can affect the accuracy of results if not properly identified and corrected. For ITI Surveyor trainees, understanding common errors and their elimination is essential.

Types of Errors in Levelling

Errors in levelling can be classified into three main categories:

Curvature & Refraction Effect and Sensitivity of Bubble Tube

In levelling, certain natural factors affect the accuracy of measurements. Two important effects are curvature of the earth and atmospheric refraction. Along with this, the sensitivity of the bubble tube plays a vital role in the precision of levelling instruments. For ITI Surveyor trainees, understanding these concepts is essential for accurate surveying.

Curvature & Refraction Effect and Sensitivity of Bubble Tube

In levelling, certain natural factors affect the accuracy of measurements. Two important effects are curvature of the earth and atmospheric refraction. Along with this, the sensitivity of the bubble tube plays a vital role in the precision of levelling instruments. For ITI Surveyor trainees, understanding these concepts is essential for accurate surveying.

Entry of Level Book (Reduced Level Calculation Methods)

In levelling, all observations are recorded systematically in a level book. Proper entry of data and correct calculation of Reduced Levels (RL) are essential for accurate results. Two main methods are used for RL calculation: Height of Instrument (HI) method and Rise & Fall method. For ITI Surveyor trainees, understanding these methods is very important.

Temporary & Permanent Adjustment (Levelling Instrument)

In levelling, proper adjustment of the instrument is essential to obtain accurate results. Adjustments are of two types: temporary and permanent. Temporary adjustments are performed at every setup, while permanent adjustments ensure the correct relationship between different parts of the instrument. For ITI Surveyor trainees, understanding both types is very important.

Different Types of Levelling

Levelling is an important process in surveying used to determine the elevation of points relative to a reference datum. Depending on the nature of work and accuracy required, different types of levelling methods are used. For ITI Surveyor trainees, understanding these types is essential for practical fieldwork.

Classification of Levelling

Levelling can be broadly classified into two categories:

Technical Terms Used in Levelling

Levelling is an important process in surveying used to determine the elevation of different points on the ground. To understand levelling operations clearly, it is essential to know the technical terms used in levelling. These terms are commonly used during fieldwork and calculations. For ITI Surveyor trainees, knowledge of these terms is fundamental.

1. Level Surface

A level surface is a curved surface that is everywhere perpendicular to the direction of gravity. Example: surface of still water.

Types of Levelling Instruments

Levelling instruments are used in surveying to determine the difference in elevation between points. These instruments provide a horizontal line of sight and are essential for accurate levelling work. For ITI Surveyor trainees, understanding the different types of levelling instruments is important for selecting the right tool for fieldwork.

Levelling Instruments

Levelling instruments consist of a telescope, level tube, and supporting structure. They are mounted on a tripod and used along with a levelling staff to measure heights.

Introduction to Levelling

Levelling is one of the most important operations in surveying used to determine the elevation of points on the earth’s surface. It helps in finding the difference in height between two or more points and is essential for construction, drainage, road alignment, and other engineering works. For ITI Surveyor trainees, understanding levelling is a fundamental requirement.

Definition of Levelling

Levelling is the process of determining the relative heights or elevations of different points with respect to a reference level known as a datum.

Traversing using Theodolite, Traverse Computation, Coordinates, Balancing, Gale’s Traverse Table, Area & Omitted Measurements

Traversing is an important method in surveying where a series of connected lines are measured using a theodolite. It is widely used for mapping, boundary surveys, and construction work. Understanding traverse computation, coordinate determination, balancing, and area calculation is essential for Surveyor trade trainees.

Traversing using Theodolite, Traverse Computation, Coordinates, Balancing, Gale’s Traverse Table, Area & Omitted Measurements

Traversing is an important method in surveying where a series of connected lines are measured using a theodolite. It is widely used for mapping, boundary surveys, and construction work. Understanding traverse computation, coordinate determination, balancing, and area calculation is essential for Surveyor trade trainees.

List of Instruments and Equipment to be Used During Surveyor Training

Surveyor training in Industrial Training Institutes (ITI) involves both theoretical knowledge and practical fieldwork. To perform surveying tasks accurately, a variety of instruments and equipment are used. These tools help in measuring distances, angles, elevations, and positions on the ground. Proper understanding and handling of these instruments are essential for becoming a skilled surveyor.

Job Responsibility of the Surveyor Trade and Overview of the Subject

The Surveyor trade is an important field in civil engineering and infrastructure development. Surveyors are responsible for measuring land, preparing maps, and providing accurate data required for construction and development projects. Their work plays a vital role in ensuring that projects are executed correctly and efficiently. Understanding the job responsibilities of a surveyor and having a clear overview of the subject is essential for students undergoing training in Industrial Training Institutes (ITI).

Introduction of First Aid

First aid is the immediate and temporary care given to an injured or ill person before professional medical help is available. It is an essential skill that everyone should learn, especially those working in technical trades such as surveying, where work is often carried out in outdoor and potentially hazardous environments. First aid helps to reduce the severity of injuries, prevent complications, and, in many cases, save lives.

Importance of Survey Trade and Job Opportunities after Completion of Training

The Surveyor trade is one of the most important technical trades in the field of civil engineering and infrastructure development. Surveying is the science and art of measuring distances, angles, and elevations to determine the relative position of points on, above, or below the surface of the earth. It plays a vital role in planning, designing, and executing construction projects such as roads, buildings, bridges, dams, and railways.

All Necessary Guidance to be Provided to Newcomers to Become Familiar with the Working of ITI System

Industrial Training Institutes (ITIs) play a crucial role in developing skilled manpower for various trades. For newcomers, entering an ITI can be both exciting and challenging. They come from different educational and social backgrounds and may not be fully aware of the structure, rules, and working system of ITI. Therefore, it is essential to provide proper guidance to help them understand the environment, expectations, and opportunities available.